Chip Resetter For Epson 7900, 7910, 9900, 9910, PX-H8000, 10000 MAINTENANCE WASTE TANKS ONLY.

It has a feedback light that indicates when a reset is successful, the LED will flash green. The battery is good for thousands of resets and they are easily replaced. All batteries are included.

The chips are reset without changing the Epson identification on the chip. The printers can not detect that an external chip resetter was used. There is no limit to the number of times a chip can be reset.

NOTE: This Chip Resetter Will Not Work On The Cartridges. You Will Need The SK179 To Reset The Cartridges For These Printers.

This Wide Format Chip Restter will only reset the chips on the Epson Chip Resetter For Epson 7900 7910, 9900, 9910, PX-H8000, 10000 Printers MAINTENANCE WASTE TANKS It will not reset any of the chips on the desktop printers. To reset desktop printer chips use the SK168 chip resetter.

Operation
When you are attempting to do a reset, the LED will light up and flash about 3-4 seconds. If the LED turned green, it means the resetting operation has been successfully completed and the chip is in a good state. If the LED turns red, or does not flash, this is an indication that the chip you are trying to reset is either corrupted or damaged.

If the LED turned red or did not flash it may be...

a) The pins are not making good contact with the chip.
b) The battery in the resetter has come loose or is expired.
c) The cartridge chip is corrupted or damaged.